RUST MANAGEMENT RMS-2100 RMS-2101 RMS-2200 RMS-2300
info@rmsgas.com               770.777.0597 / 800.347.5872 phone            770.777.0599 fax  
610 McFarland/400 Drive   Alpharetta, GA  30004 USA

RMS-2100 MSDS

Overview MSDS Tech Bulletin ABS
Section 1 General Information
Product Code or File Name

RMS-2100

Trade Name or Chemical Name  RMS-2100
Chemical Family Neutralized Rust Remover
Synonym None
Formula Mixture
HMIS Rating 

Health…..1
Flammability…..0
Reactivity…..0

Personal Protection…..(See Section 8)

Contact: Refrigerant Management Services
610 McFarland/400 Drive
Alpharetta, Georgia 30004
Phone: 1-800-347-5872
Fax: 770-777-0599

Section 2 Hazardous Ingredients/Hazard Data

Chemical Name(s)                               CAS Number         % WT    TLV TWA     PEL         SEC313           CARCINOGENS

Sodium Phosphate                               7558-80-7               5-10            NA                       NA        No                  NA
Tetrapotassium Pyrophosphate        7320-34-5               10-20          NA                       NA          No                 NA

Information for mixture is based on constituent MSDS which are available upon request (minus proprietary trade name)


Section 3   Physical Data

Boiling Point @760 mm Hg
pH
Vapor Pressure mm Hg @20
° C
Vapor Density (air = 1)
Percent Volatile by Weight
Specific Gravity or Bulk Density
Solubility in Water
Evaporation Rate
Appearance

Odor                                                      

>212° F
6.3
NA
>1 (water)
60
1.31
100%
<1
Clear, Colorless Liquid
Mild                                   


Section 4     Fire and Explosion Hazard Data

Flash Point °F
Autoignition Temperature
Flammability Limits in Air (%V)
Extinguishing Media
Special Fire Fighting Procedures
Unusual Fire & Explosion Hazards

NA
NA
NA
NA
NA
High temperature may cause containers to expand or rupture and spill or leak.
Keep containers cool with water until fire is suppressed.


Section 5   Health Hazard Data/Effects of Overexposure
Eye Contact May cause irritation, experienced as mild discomfort and seen as slight excess redness of eye.
Skin Contact No adverse effect expected from absorption of material through the skin. Brief contact is not irritating. Prolonged contact, as with clothing wetted with the material, may cause local redness of the skin with possible mild discomfort.
Ingestion No adverse effects expected. If more than small amounts are swallowed, abdominal discomfort, nausea, and diarrhea may occur.
Inhalation This product has a low vapor pressure and is not expected to present an inhalation hazard at ambient conditions.  Caution should be taken to prevent excessive misting of this product.
Acute Effects Of Overexposure None known.
Chronic Effects Of Overexposure None known.

Section 6 Emergency and First Aid Procedures
Eyes Immediately flush eyes with plenty of water for at least 15 minutes.  If irritation or redness persists, seek medical attention.
Skin Remove contaminated clothing and wash affected area(s) with plenty of soap and water for several minutes.  If irritation or redness develops, seek medical attention
Inhalation Remove from contaminated atmosphere.  If breathing has ceased clear the victim’s airway and start artificial respiration.  Get medical attention.
Ingestion

Give several glasses of water.  Seek medical attention.                                                                                       


Section 7 Reactivity Data
Product Stability Stable
     Conditions to avoid  None
Chemical Incompatibility Strong acids and strong akalines
Hazardous Decomposition Products None reasonably foreseeable
Hazardous Polymerization Will not occur
     Conditions to avoid  None
Corrosive to metal Does not react with ferrous metals.  Not tested on white metals or copper.
Oxidizer No

Section 8   Special Protection Information
Respiratory Protection Respiratory protection is not required under normal use. In extremely misty atmospheres, use an approved respiratory protector.
Ventilation  Good general ventilation sufficient for most operations.
Gloves Impervious gloves should be worn.  Natural and butyl rubber or neoprene, nitrile and PVC have been suggested.
Eye Protection Use safety glasses or chemical goggles.

Section 9  Environmental Data
Environmental toxicity data  No data available
Spill or leak procedure Ventilate area.  Contain spill if possible. Wipe up or absorb on suitable material.  Prevent entry into sewers and waterways.  Avoid contact with skin, eyes or clothing.
Hazardous Surface Superfund Not applicable
Waste Disposal Method This product has been evaluated for RCRA characteristics and does not meet the criteria of a hazardous waste if discarded in its purchased form  Under RCRA, it is the responsibility of the user of the product to detwemine at the time of disposal whether the product meets RCRA criteria for hazardous waste.  This is because the product uses, transformations, mixtures, processes, etc. may render the resulting materials hazardous.
Hazardous Waste 40CFR261 Not applicable.

Container Disposal

 

“Empty” drums should be completely drained, properly bunged, and promptly shipped to the supplier or a drum reconditioner.  All other containers should be disposed of in an environmentally safe manner and in accordance with government regulations.

Section 10 Shipping Data
D.O.T. Proper Shipping Name Not applicable
Hazardous Substance 49 CFR CERCLA Not applicable
D.O.T. Hazard Class   Not regulated by D.O.T.
D.O.T. Labels Required None
D.O.T. Placards Required  None
Poison Constituent None
Bill of Lading Description Same as Section 1, Trade Name

UN/NA Code

None

Section 11 Supplier Information

Important: The information presented herein, while not guaranteed, was prepared by competent technical personnel and is true and accurate to the best of our knowledge.  NO WARRANTY, OR GUARANTEE, EXPRESS OR IMPLIED IS MADE REGARDING PERFORMANCE, STABILITY, OR OTHERWISE.  This information is not intended to be all-inclusive as to the manner and conditions of use, handling and storage.  Other factors may involve other or additional safety or performance considerations.  While our technical personnel will be happy to respond to questions regarding safe handling and use procedures, safe handling and use remains the responsibility of the customer.  No suggestions for use are intended as, and nothing herein shall be construed as a recommendation to infringe any existing patents or violate any federal, state and local laws.

This product safety data sheet is offered solely for your information, consideration and investigation. RMS of Georgia, LLC. provides no warranties either expressed or implied and assumes no responsibility for the accuracy or completeness of the data contained herein.